TIME AFTER TIME GREEN-MPG HAS PROVEN TO WORK,
UNLIKE SIMILAR PRODUCTS OF THE PAST.
IT TOOK MANY YEARS OF R&D TO PERFECT.
TRY GREEN-MPG TODAY
YOU WILL NOT BE DISAPPOINTED.
HOW DOES GREEN-MPG WORK?
Untreated Fuel molecules tend to “clump” together due to attraction between molecules with charges of opposite polarities. This causes an inefficient burn. As a result, your engine experiences loss of power, lower gas mileage and lots of carbon build-up. GREEN-MPG’s powerful magnetic field causes these “clumps” of fuel molecules to be charged with a single polarity, thus they repel each other making the fuel disperse more efficiently causing more complete combustion and power production. GREEN-MPG will actually remove the existing carbon build-up in your engine - this usually takes an average of 3 tanks full of gas, followed by a dramatic increase in gas mileage and horsepower.
GREEN-MPG will improve engine performance and helps vehicle start quicker. Stops scale build up and corrosion in engine. Reduce wear on O2 sensor and catalytic converter and also helps pass the emission test . Green-MPG will improve engine performance and helps vehicle start quicker. Stops scale build up and corrosion in engine. Reduce wear on O2 sensor and catalytic converter and also helps pass the emission test. Only $24.95 for a set (a pair) of Green-MPG earth magnets, includes 1 cable tie (all you need to install it) and instructions.
Experience the GREEN-MPG difference immediately. Quick install. Full Instructions included. Free Shipping!
Installing
1. Locate the fuel supply line under pressure feeding the engine from the fuel tank.
Vehicles with fuel injection engines normally have two lines running parallel between the
fuel tank and the engine, a supply line and a return line. While the engine is running,
feel the lines and the colder one of the two will be the supply line.
2. Insert the nylon tie through the grooves that have the tie retainer slot. This is to help hold
the tie in position while applying the magnet to the fuel line.
3. Simply place the magnet over the fuel supply line, at the accessible location as close to the carburetor or fuel injection system as possible. However do not install the magnet in close
proximity to the alternator or any electromagnetic energy source. Installation on a metal line
has given the best performance. In some cases there has been somewhat less effectiveness
on plastic and rubber. We believe better radiation can be achieved through the metal;
while we have had good positive results on all materials, if you can, choose a metal fuel line
even if it is a connector before the carburetor etc. Do not install the device on braided
metal fuel line. This should be replaced for base metal, rubber or plastic fuel pipe.
4. Align the magnet halves so as the side grooves are alike. Complete installation by wrapping
the tie completely around the magnet making sure the tie fits into the side grooves. Trim off
the excess tie. Check again whether the halves are vertically as well as horizontally alike.
Due to the cleaning and removal process of the carbon/varnish deposits inside the cylinders, the fuel consumption may temporarily increase during the initial cleaning cycle. Mileage will stabilize after a short time. Noticeable improvement may take up to four tanks of fuel and, for optimum results to be achieved, please allow 1,000 miles or 3 full tanks of gas. A clean air filter, or a measure of carburetor or injector cleaner mixed in the fuel will also help to give faster results and regular servicing is obviously still necessary. Increased performance and smoother running will often also be noticed.
Frequently Asked Questions
Q. When should I check my mileage and when can I expect results?
A. Make sure you record your mileage before installing your magnet. Increase in gas mileage usually occurs after about 2-4 tanks full of gas.
Q. Why after 2-4 tanks full of gas?
A. Before the magnet will improve your gas mileage, it must first clean out the carbon deposits in your engine, depending on the amount of those deposits and the overall efficiency of your engine, it generally takes an average of 3 tanks full of gas.
Q. Can I install the magnet myself?
A. Yes, if you know where the fuel line is on your vehicle, it is not hard to install.
Q. How long will it take to install the magnet on my vehicle?
A. You or your mechanic should be able to install magnet in about few minutes.
Q. Will magnet effect my vehicle’s warranty?
A. NO. Since magnet is designed to be fastened on to the outside of your fuel line, not cutting into it, it will not void any warranties.
Q. Is there anything I need to do after the installation of magnet?
A. No, however you may need to change your oil in half the normal interval (i.e. 1500 miles as opposed to 3000 miles) with the first oil change, due to the magnet’s ability to clean the carbon build-up in your engine. After this first time, you will be able to go for an extended period of time, normally at least double or 6000 miles before the 2nd and future oil changes.
Q. How long will my magnet last?
A. Your magnet consists of permanent magnets that are said to last a t least 900 years.
Q. Will my magnet cause any problems with the computer n my vehicle?
A. NO. The computer is usually located inside the vehicle. There is plenty of distance between magnet and the computer. Also, the type of computer in your vehicle can not be adversely affected by the presence of a magnet.
Q. Will magnet help me pass my smog test?
A. YES. You should experience about 50% reduction in emissions with your magnet when properly installed.
Q. The manufacturer of my vehicle suggests I use a Premium Fuel. With magnet can I now use a lower octane fuel and save even more money?
A. Yes, in most cases. However, not all engines are alike. You must first wait until the carbon build-up is cleaned out of your engine. As long as there is no knocking or pinging, and the performance is as it should be, the lower octane fuel will not harm your engine.
Q. Can the magnet give an extra boost?
A.YES. Everyone that has tried magnet has noticed more Horse Power. More power means less down shifting when climbing hills, which translates into better gas mileage.
Q. Why can’t the oil companies provide this boost?
A. The dispersion of fuel molecules occurs only when the fuel is passed through the magnetic field of the magnet . When the engine is off, this dispersion ceases, and the fuel slowly returns to a more congested state. This phenomenon can only be induced by the magnet .
Q. Will magnet work only on gasoline or will it work on other fuels as well?
A. Magnet will work on just about any fuel; gasoline, diesel, propane, natural gas, fuel oil, etc., but, the percentage of improvement differs from one type to another.
Q. Will my magnet work on fuel injection systems?
A. YES, place your magnet as close to the intake as possible for optimum results.
Q. Where do I install my magnet on a carburetor engine?
A. As close to the carburetor as possible.
Q. Do I need to adjust my carburetor?
A. No, you should not have to make any adjustment, as long as the engine is well tuned to begin with.
Q. Will magnet work on an air cooled engine?
A. Yes
Q. Will magnet work on hybrid cars?
A. Yes. You would install magnet on the fuel line the same as with conventional vehicles.
Q. Will magnet fit on my car?
A. Yes. Magnet is so versatile, because of its size and application, that it will fit on all vehicles.
Q. What if I can’t install magnet close to the intake of my engine as indicated? Is there some place else to locate it or does that mean that it won’t work on my vehicle?
A. As long as you install magnet after the fuel pump and fuel filter, you should still get great results. However, the effectiveness is optimized when installed near the intake of your engine.
Q. Does high temperature affect performance?
A. Magnet is very heat resistant; however, it should not be placed close to the exhaust manifold or against the engine block.
Q. How soon will the magnet pay for itself?
A. This is directly proportional to the price you pay for fuel and the amount of driving you do. magnet users have reported a pay back between 2-5 weeks.
Q. How much improvement can I expect?
A. This depends on the type and size of your engine, type of driving, etc. Fuel savings of up to 60% have been reported, but average is about 20%.
Q. If magnet is so good, why don’t all the automobile manufacturers put it on new cars?
A. Probably for the same reason that the auto makers don’t make vehicles that exceed minimum government standards for fuel mileage and emissions.
LINKS TO CURRENT GREEN AUTOMOTIVE TECHNOLOGIES
Interactive
Interactive
Hybrid payback?
Want to buy a hybrid, but concerned about the cost? Check out these models and comparisons.
Interactive
Greenest, meanest
View the list of greenest and meanest 2007 vehicles as determined by their 'green score.'
The coming Hydrogen economy is in the news everyday, even President Bush has spoken of the coming Hydrogen economy.
Here are some recent hydrogen fuel cell stories that may interest you.
Hydrogen cars will save thousands of lives a year from lung diseases
South Carolians fuel cell iniative
Bill passed by US senate helps fuel cell development
CNN.com - Eco-car more efficient than light bulb http://www.cnn.com/2005/TECH/07/04/eco.car/index.html?section=cnn_latest
Watch this video of how fuel magnets work from Channel 8 TV
Green-MPG will improve engine performance and helps vehicle start quicker. Stops scale build up and corrosion in engine. Reduce wear on O2 sensor and catalytic converter and also helps pass the emission test.
Only $24.95 for a set (a pair) of Green-MPG earth magnets, includes 1 cable tie (all you need to install it) and instructions.
Vehicles with fuel injection engines normally have two lines running parallel between the
fuel tank and the engine, a supply line and a return line. While the engine is running,
feel the lines and the colder one of the two will be the supply line.
the tie in position while applying the magnet to the fuel line.
proximity to the alternator or any electromagnetic energy source. Installation on a metal line
has given the best performance. In some cases there has been somewhat less effectiveness
on plastic and rubber. We believe better radiation can be achieved through the metal;
while we have had good positive results on all materials, if you can, choose a metal fuel line
even if it is a connector before the carburetor etc. Do not install the device on braided
metal fuel line. This should be replaced for base metal, rubber or plastic fuel pipe.
the tie completely around the magnet making sure the tie fits into the side grooves. Trim off
the excess tie. Check again whether the halves are vertically as well as horizontally alike.
Frequently Asked Questions
|
Interactive |
| |
|
Interactive |
| |
Hybrid payback? Want to buy a hybrid, but concerned about the cost? Check out these models and comparisons. |
|
Interactive |
| |
Greenest, meanest View the list of greenest and meanest 2007 vehicles as determined by their 'green score.' |
The coming Hydrogen economy is in the news everyday, even President Bush has spoken of the coming Hydrogen economy.
Watch this video of how fuel magnets work from Channel 8 TV
Green-MPG will improve engine performance and helps vehicle start quicker. Stops scale build up and corrosion in engine. Reduce wear on O2 sensor and catalytic converter and also helps pass the emission test.
Only $24.95 for a set (a pair) of Green-MPG earth magnets, includes 1 cable tie (all you need to install it) and instructions.
Copyright . GREEN-MPG Projects. All rights reserved.
